Alloy roofs and bonnets

Hi Everyone, Removing dents from alloy roofs and bonnets is more difficult than from steel. The dents need to be smaller and can take longer but it is still possible to remove small dents from alloys and return the car to original condition without spray painting. Cheers Mark

Removing dents from doors

Hi Everyone, Removing dents from doors can usually be done without the need to romove any trim.This eliminates any risk of breaking clips or damaging the trim. A special protector is used to prevent any damage to the glass and tools are used to gently massage the dent out thereby returning the panel to its original condition. Cheers Mark

Hail in Winter

Hi Everyone, There has been hail at Currumbin and Coomera last week! I cannot remember hail in the middle of winter before. Fortunately if your car has been damaged by small hail up to 20cent coin size it can be removed without panel beating sanding filling or spray painting. Paintless Dent Removal will return your paintwork to original condition by expertly and carefully pushing the dent out while retaining the original duco , no fadeing cracking or colour matching problems. Cheers Mark

Removing dents

Hi Everyone, Using the paintless dent removal process for dents allows for most small dents to be removed completely. However some sharp dents or larger dents can be removed only to 95%. I take pride in my work and remove every dent as carefully as possible. I explain to the customer if I dont think I can remove the dent completely and let the customer decide if they want to proceed. Cheers Mark

Replying to messsages

Hi Everyone, I try to reply to all my messages within 24hours. Sometimes the phone number  is not displayed because it comes from a switchboard of a company or a private number. If I have not returned your call please text me with a short message and your phone number and I will be able to return your call. Cheers Mark      

Rear quarter panel most difficult

Hi Everyone, The most difficult area of the car to remove dents is the rear quarter panels. Most cars have two layers of metal over the rear wheel which means access cannot be gained from the wheel arch. Sometimes access can be obtained by removing the tail light or through the boot. Sometimes if the dent is not deep glue pulling can be used. Cheers Mark

Modern cars most suitable for paintless dent removal

Hi Everyone, Modern cars less than 10 years old are the most suitable for PDR as the metal is thinner and the dents are more easily massaged out. Older cars can still have dents removed using PDR but the dents need to be smaller and not have a sharp centre. If you are not sure of the possibility of removing a dent please contact me and I will provide a free assessment for you. Cheers Mark

Paintlesss dent removal affordable option

PDR is a more cost effective way than normal spray painting and panel beating to remove small dents in cars. Most dents cost between $100 and $200 and can usually be done in 2 hours. As I am mobile it can be done at your home at a time that is convenient to you. Cheers Mark

Glue pulling small dents without trim removal

Hi Everyone, Sometimes small dents cannot be accessed from inside the panel. This is where glue pulling can be used to remove the dent that would not be able to be pushed out. It is suitable for small round dents less than the size of a 50 cent coin with no crease in them. If the dent is suitable it is much cheaper than spraypainting and the original paint is retained. Cheers Mark

most suitable size dent for PDR

Hi Everyone, Paintless dent removal is best suited to small dents smaller than a 50cent coin that do not have a sharp deep centre and small crease dents. Larger dents can be removed if they are shallow or are suitable for glue pulling. I provide a free no obligation quote so if you need advice on whether your dents are suitable please feel free to contact me. Cheers Mark

Call 0412 096 959

or complete our online quote form

Close Menu